FireNav Admin

FireNav Pulse

Program, assign, and maintain station PulseBox controllers.

Department

Detecting from your account…

Registered devices

—

Online

—

USB programmer

Not connected

PulseBox configuration

Use USB for first setup or recovery. Use the network for a PulseBox that is already online.

Connect board

Use a USB data cable, then approve the serial device.

No board connected.

Choose Wi-Fi

Scan networks using the ESP32 antenna.

Connect a board to scan.

Apply changes

Choose the connection method that matches the device.

First setup or offline recovery

Connect the PulseBox by USB to enable programming.

Update an online PulseBox

Select an online device from the list to enable network updates.

New PulseBox configuration

Department and station data come from FireNav.

Device ID Device name Station Firmware

Wi-Fi profiles

Higher priority networks are tried first.

MQTT broker MQTT username MQTT password

Alert for apparatus

Loading apparatus…

Relay output

RelayGPIODuration ms Active high

Motorola radio input (optional)

Enable only after the CDM1250 alarm output is connected through an opto-isolator. Monitor mode records and displays radio activations without operating the PulseBox relay. Relay activation is always blocked while Wi-Fi or MQTT is offline.

Enable isolated input Action Input GPIO Active high Internal pull-up Debounce ms Cooldown ms

Disable relay activation for maintenance

PulseBox devices

Edit any saved configuration and reprogram a connected board.

Loading devices…